List
Use the list command to list a specific ELS filter or all ELS filters.
Syntax:
list all
filter
filter#
all Lists all currently configured filters.
filter Lists the filter specified by
filter#.
ELS Message Buffering Configuration Commands
Table21 describes the commands available at the ELS Config Advanced> prompt.
Table21. ELS Message Buffering Configuration Commands
Command Function
? (Help) Displays all the commands available for this command level or lists
the options for specific commands (if available). See “Getting Help”
on page 10.
List Displays the configuration settings for message buffering.
Log Enableslogging of selected messages to the message buffer.
Nolog Turns offlogging of selected messages to the message buffer.
Set Sets the size of the message buffer, the wrapping mode, whether
logging occurs, which event will end message buffering, and what
the system does when message buffering is stopped by an event.
Exit Returnsyou to the previous command level. See “Exiting a Lower
Level Environment” on page 11.
List
Use the list command to list the ELS message buffering configuration.
Syntax:
list status
Example:
ELS Config Advanced> list status
----------------------------------Configuration-----------------------------------
Logging Status: OFF Wrap Mode: ON Logging Buffer Size: 8500 Kbytes
Stop-Event: APPN.2 Stop-String: netdn for intf 6
Additional Stop-Action: NONE
See “Set” on page186 for a description of the commands that change the values in
the display.

Log

Use the log command to select which messages will be logged to the message
buffer.
Syntax:
log event
group
ELS Configuration Commands (Talk6)
184 MRS V3.2 Software User’s Guide
|
|
|
|
||
|||
|
|||||||||
|
|||
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
||
||