Default Value:
4
Example:
LEC Config> set connection-completion-time 5
control-timeout
This parameter sets the maximum cumulative control timeout of a request.
A current timeout value is initialized to the value of

initial-control-timeout

.
If a response to a request is not received within the current timeout value,
the current timeout is multiplied by the value of the

multiplier-control-

timeout
and the request is reissued. Each time the current timeout value
expires, this process is repeated until the current timeout value exceeds the
value of

control-timeout

.
Valid Values:
An integer number of seconds in the range of 10 to 300.
Default Value:
30
Example:
LEC Config> set control-timeout 100
elan-name
Specifies name of the ELAN that the LEC wishes to join. This is the ELAN
name sent to the LECS in the configure request (if the LEC autoconfigures)
or to the LES in the join request. The LECS or LES may return a different
ELAN name in the response.
Valid Values:
Any character string length of0-32bytes.
Default Value:
Blank
Note: A blank name (0 length string) is valid.
Example:
LEC Config> set elan-name FUZZY
esi-address
Sets the ESI portion of the LEC’s ATMaddress.
Specify the ESI portion (octets 13 through 19) of the LEC’s ATMaddress.
The ESI and selector combination of the LEC must be unique among all
LAN emulation components on the device.
Valid Values:
Any 12 hexadecimal digits.
Default Value:
Burned-in ESI
Example:
set esi
Select ESI
(1) Use burned in ESI
(2) 11.22.33.44.55.66
Enter selection [1]?
Configuring Forum LE Clients
302 MRS V3.2 Software User’s Guide