Gefen EXT-IP-2-RS2322 user manual #setsendtimeout

Advanced Operation

Commands

#set_send_time_out

Sets the time-out value for sending data collected from a device to the control system in Bridging Mode when a Start Delimiter and End Delimiter have been set. If no data has been collected for the specified time, the data is sent without waiting for the End Delimiter.

Syntax

#set_send_time_out param1

Parameters

param1	Serial port	[1	... 2]
param2	Time out (ms)	[0	... 255]

Example

#set_send_time_out 1 30

UART 1 bridging sent Time Out is set to 30 ms

Related Commands

#set_add_delim #set_end_del #set_serial_mode #set_start_del

page 23