Advanced Operation
Commands
#show_del_prms
Displays the current delimiter parameters for the specified serial port.
Syntax
#show_del_prms param1
Parameters
param1Port[1 ... 2]
Example
#show_del_prms 1
Delimiter Param’s in bridge mode, UART 1 Line Delay = 1000ms
Time To Force Send = 30ms Count Byte To Force Send = 100 Add Delimiters In Data = False Use Start Delimiter = False Start Delimiter Size = 1 Start Delimiter Value = A0 Use End Delimiter = True
End Delimiter Size = 1 Start Delimiter Value = B0
Related Commands
#set_add_delim #set_end_del #set_send_byte_cnt #set_send_time_out #set_serial_params #set_start_del
page 38
