Advanced Operation
|
| Commands |
Command |
| Description |
| ||
#show_serial_params |
| Displays the settings of the specified |
#show_telnet_pass |
| Displays the current TCP terminal password |
#show_ver_data |
| Displays the firmware and hardware version of the IP to |
|
| |
#system_wide_reset |
| Restarts the IP to 2 x |
|
| the supplied parameter |
#use_discovery |
| Enables or disables discovery mode |
#use_tcp_access |
| Enables or disables TCP access mode |
#use_tcp_term_pass |
| Enables or disables the password prompt at the |
|
| beginning of a Telnet session |
#use_udp_access |
| Enables or disables UDP access |
#use_udp_echo |
| Enables or disables UDP echo |
page 12
