Dell 38XX Check Remote Replication Status, Check Remote Replication Group Consistency, FileSystem

Parameter	Description
	cache. Valid values are webServer, dataBase, or
	fileSystem.

Check Remote Replication Status

NOTE: This command valid only with Fibre Channel storage arrays.

Description

This command returns the status of a remote replication virtual disk. Use this command to determine when the status of the remote replication virtual disk becomes Optimal.

Syntax

check remoteReplication localVirtualDisk [virtualDiskName] optimalStatus timeout=timeoutValue

Parameters

Parameter	Description
localVirtualDisk	The name of any remote replication virtual disk.
	The remote replication virtual disk can be the
	primary virtual disk or the secondary virtual disk of
	a remote replication pair. Enclose the virtual disk
	name in square brackets ([ ]). If the virtual disk
	name has special characters, you also must
	enclose the virtual disk name in double quotation
	marks (" ").
timeout	The time interval within which the software can
	return the remote replication virtual disk status.
	The timeout value is in minutes.

NOTE: This command waits until the status becomes Optimal or the timeout interval expires.

Check Remote Replication Group Consistency

Description

This command applies to a remote replication group that has underlying repository virtual disks. The command produces a report based on analysis of the data in the repository.

Syntax

check asyncRemoteReplicationGroup[asyncRemoteReplicationGroupName] repositoryConsistency localVirtualDisk=["localVirtualDiskName"] file="filePath"

145