Dell 32XX, 34XX, 38XX, 36XX manual Set Enclosure Attribute, Set Enclosure Identification

Set Enclosure Attribute

Description

This command sets user-defined attributes for an enclosure.

Syntax

set enclosure [enclosureID] (chassisName assetTag)= "userID"

Parameters

Parameter	Description
enclosureID	Identifies a specific enclosure for which to set the
	attribute. Enclosure ID values are 0 to 99. You must
	put brackets ([ ]) around the enclosure ID value.
chassisName	Chassis name or number to give the new
	enclosure. Chassis names can be any combination
	of alphanumeric characters with a maximum
	length of 32 characters. Alphabetical characters
	can be uppercase or lowercase. You can also use
	the underscore character (_) and the hyphen (‑)
	character. You cannot use spaces in a chassis
	name. You must put quotation marks (" ") around
	the chassis name.
assetTag	Asset tag name or number to give the new
	enclosure. Asset tags can be any combination of
	alphanumeric characters with a maximum length
	of ten characters. Alphabetical characters can be
	uppercase or lowercase. You can also use the
	underscore character (_) and the hyphen (‑)
	character. You cannot use spaces in an asset tag
	name. You must put quotation marks (" ") around
	the asset tag name.

Set Enclosure Identification

Description

This command sets the ID of an enclosure in a storage array.

Syntax

set enclosure ["Service Tag"] id=enclosureID

290