Dell 34XX, 38XX CacheFlushStart, DefaultHostType, FailoverAlertDelay, MediaScanRate, UserRole

Parameter	Description
	values are 4 (4 KB), 8 (8 KB), 16 (16 KB), or 32 (32
	KB).
cacheFlushStart	The percentage of unwritten data in the cache that
	causes a cache flush. Use integer values from 0 to
	100 to define the percentage. The default value is
	80.
defaultHostType	The default host type of any unconfigured host
	port to which the RAID controller modules are
	connected. To generate a list of valid host types for
	the storage array, run the show storageArray
	hostTypeTable command. Host types are
	identified by a name or a numerical index. Enclose
	the host type name in double quotation marks (" ").
	Do not enclose the host type numerical identifier
	in double quotation marks.
failoverAlertDelay	The failover alert delay time in minutes. The valid
	values for the delay time are 0 to 60 minutes. The
	default value is 5.
mediaScanRate	The number of days over which the media scan
	runs. Valid values are disabled, which turns off
	the media scan, or 1 day to 30 days, where 1 day is
	the fastest scan rate, and 30 days is the slowest
	scan rate. A value other than disabled or 1 to 30
	does not allow the media scan to function.
password	The password for the storage array. Enclose the
	password in double quotation marks (" ").
userRole	Defines the user role for the password. The user
	role can be either:
	• admin – Enables you to view and modify
	storage array configurations
	• monitor – Enables you to view storage array
	configurations and monitor storage array health
	conditions, but not modify the configuration
	The userRole parameter is optional. If you do
	not use the userRole parameter, the storage array
	uses any password that you define as the
	administrator password.
userLabel	The name for the storage array. Enclose the
	storage array name in double quotation marks (" ").
isnsRegistration	The means of listing the iSCSI target on the iSNS
	server. Refer to the set storageArray
	isnsRegistration command for information
	about how to use this parameter.

320