Dell 34XX, 38XX Capacity=500MB, Capacity=2GB, ThinProvisioned, Mapping, RepositoryExpansionPolicy

[repositoryMaxCapacity=repositoryMaxCapacityValue (KBMBGBTBBytes)] [warningThresholdPercent=warningThresholdPercentValue] [repositoryExpansionPolicy=(automaticmanual)] [cacheReadPrefetch=(TRUE FALSE)]

Parameters

Parameter	Description
capacity	The size of the virtual disk that you are creating.
	Size is defined in units of MB, GB, or TB. The
	following are examples of the syntax:
	•	capacity=500MB
	•	capacity=2GB
thinProvisioned	This parameter enables thin provisioning for the
	new virtual disk. To use thin provisioning, set this
	parameter to TRUE. For no thin provisioning, set
	this parameter to FALSE.
owner	The RAID controller module that owns the virtual
	disk. Valid RAID controller module identifiers are 0
	or 1, where 0 is the RAID controller module in slot
	0, and 1 is the RAID controller module in slot 1. If
	you do not specify an owner, the RAID controller
	module firmware determines the owner.
mapping	This parameter enables you to map the virtual disk
	to a host. If you want to map later, set this
	parameter to none. If you want to map the virtual
	disk now, set this parameter to default, and the
	virtual disk is mapped to all hosts that have access
	to the storage pool.
	The default option is none.
warningThreshold	Valid values are from 1 to 100.
	The default value is determined by the RAID
	controller module firmware.
	Setting this parameter to 100 disables warning
	alerts.
repositoryExpansionPolicy	Valid values are automatic and manual.
cacheReadPrefetch	The setting to turn on or turn off cache read
	prefetch. To turn off cache read prefetch, set this
	parameter to FALSE. To turn on cache read
	prefetch, set this parameter to TRUE.
segmentSize	Amount of data (in kilobytes) that the RAID
	controller module writes on a single physical disk
	in a virtual disk before writing data on the next
	physical disk. Valid values are 8, 16, 32, 64, 128,

180