Dell 38XX, 34XX, 32XX, 36XX manual Set Host, HostGroupName

Set Host

Description

This command assigns a host to a host group or moves a host to a different host group. You can also create a new host group and assign the host to the new host group with this command. The actions performed by this command depend on whether the host has individual mappings or does not have individual mappings.

Syntax

set host [hostName]

hostGroup=("hostGroupName" none defaultGroup) userLabel="newHostName" hostType=(hostTypeIndexLabel hostTypeIndexNumber)

Parameters

Parameter	Description
host	The name of the host that you want to assign to a
	host group. Enclose the host name in square
	brackets ([ ]). If the host name has special
	characters, you must also enclose the host name
	in double quotation marks (" ").
hostGroup	The host group to which you want to assign the
	host. (The following table defines how the
	command runs if the host does or does not have
	individual virtual disk-to-LUN mappings.) Enclose
	the host group name in double quotation marks ("
	"). The defaultGroup is the host group that
	contains the host to which the virtual disk is
	mapped.
userLabel	The new host name. Enclose the host name in
	double quotation marks (" ").
hostType	The index label or number of the host type for the
	HBA host port. Use the show storageArray
	hostTypeTable command to generate a list of
	available host type identifiers. If the host type has
	special characters, enclose it in double quotation
	marks (" ").
Host Group Parameter	Host Has Individual Virtual Disk-	Host Does Not Have Individual
	to-LUN Mappings	Virtual Disk-to-LUN Mappings
hostGroupName	The host is removed from the	The host is removed from the
	present host group and is placed	present host group and is placed

293