Parameters

Parameter

eventType

Description

This parameter is the integer value for the event. Enter the event value in a hexadecimal format, for example, 0x280D. Always begin the hexadecimal value with 0x to indicate that it is in hexadecimal format. If you do not use 0x, the value will be interpreted as a decimal and converted to a hexadecimal value, before applying the block or unblock command. This can cause an incorrect event to be blocked or unblocked.

An error is displayed if you enter an invalid event.

Set Foreign Physical Disk to Native

A physical disk is considered to be native when it is a part of a storage array disk group. A physical disk is considered to be foreign when it does not belong to a storage array disk group or when it fails to be imported with the physical disks of a disk group that are transferred to a new storage array. The latter failure creates an incomplete disk group on the new storage array.

Description

Run this command to add the missing (foreign) physical disks back into their original disk group and to make them part of the new storage array disk group configuration of the new storage array.

Use this operation for emergency recovery only: when one or more physical disks must be changed from a foreign physical disk status and returned to a native status within their original disk group.

CAUTION: Using this command for purposes other than what is stated above might result in data corruption or data loss without notification.

Syntax

set (physicalDisk [enclosureID,slotID]

physicalDisks [enclosureID1,slotID1 enclosureID2, slotID2...

enclosureIDn,slotIDn] allPhysicalDisks) nativeState

Parameters

Parameter

Description

 

 

physicalDisk or physicalDisks

The enclosure and the slot where the physical disk

 

resides. Enclosure ID values are 0 to 99. Slot ID

 

values are 0 to 31. Enclose the enclosure ID values

 

and the slot ID values in square brackets ([ ]).

allPhysicalDisks

Selects all the physical disks.

292

Page 292
Image 292
Dell 34XX, 38XX, 32XX, 36XX manual Set Foreign Physical Disk to Native