Dell 34XX, 38XX, 32XX, 36XX manual Create RAID Virtual Disk Manual Physical Disk Select, SecurityType

Parameter	Description
securityType	The setting to specify the security level when
	creating the disk groups and all associated virtual
	disks.
	• none—The disk group and virtual disks are not
	secure.
	• capable—The disk group and virtual disks are
	capable of having security set, but security has
	not been enabled.
	• enabled—The disk group and virtual disks have
	security enabled.
	For information about securityType, see
	Security Type.
dataAssurance	The setting to specify that a disk pool has data
	assurance protection to make sure that the data
	maintains its integrity. When you use this
	parameter, only protected physical disks can be
	used for the disk pool.
	These settings are valid:
	• none – The disk pool does not have data
	assurance protection.
	• enabled – The disk pool has data assurance
	protection. The disk pool supports protected
	information and is formatted with protection
	information enabled.
	The default value is none.

Create RAID Virtual Disk (Manual Physical Disk Select)

Description

This command creates a new disk group and virtual disk, and enables you to specify the physical disks for the virtual disk.

NOTE: You cannot use mixed physical disk types in the same disk group and virtual disk. This command fails if you specify different types of physical disks for the RAID virtual disk.

Syntax

create virtualDisk physicalDisks=(enclosureID1,drawerID1,slotID1 ...

enclosureIDn,drawerIDn,slotIDn)

diskGroupUserLabel="diskGroupName" raidLevel=(0 1 5 6) userLabel="virtualDiskName" [capacity=virtualDiskCapacity]

[owner=(0 1)] [cacheReadPrefetch=(TRUE FALSE)] [segmentSize=segmentSizeValue] [usageHint=(fileSystem dataBase multiMedia)] [enclosureLossProtect=(TRUE FALSE)] [drawerLossProtect=(TRUE FALSE)] [dssPreAllocate=(TRUE FALSE)]

176