Dell 34XX, 38XX, 32XX, 36XX manual RepositoryPhysicalDiskCount, PhysicalMediaType

Parameter	Description
	enclosure ID values and the slot ID values in
	parentheses.
repositoryPhysicalDiskCount	Use this parameter when you create a new disk
	group.
	The number of unassigned physical disks that you
	want to use for the snapshot (legacy) repository
	disk group.
repositoryDiskGroupUserLabel	Use this parameter when you create a new disk
	group.
	The name of a new disk group to be used for the
	repository virtual disk. Enclose the repository disk
	group name in double quotation marks (“ ”).
repositoryDiskGroup	The name of an existing disk group where you
	want to place the repository virtual disk. Use this
	parameter if you do not want to put the repository
	virtual disk in the same disk group as the base
	virtual disk. The default is to use the same disk
	group for both the base virtual disk and the
	repository virtual disk. Enclose the name of the
	repository disk group in double quotation marks ("
	").
userLabel	The name that you want to give to the snapshots
	(legacy) virtual disk. If you do not want to provide a
	name, the CLI creates a name using the base
	virtual disk user label that you provide.
enclosureLossProtect	The setting to enforce enclosure loss protection
	when you create the snapshot (legacy) repository
	virtual disk. To enforce enclosure loss protection,
	set this parameter to TRUE. The default setting is
	FALSE.
physicalMediaType	The type of physical disk media that you want to
	use for the disk group. Valid physical disk media
	consists of:
	• HDD—Use this option when you have hard
	physical disks in the expansion enclosure.
	• SSD—Use this option when you have solid state
	physical disks in the expansion enclosure.
	• unknown—Use if you are not sure what types of
	physical disk media are in the expansion
	enclosure.
	• allMedia—Use this option when you want to
	use all types of physical disk media that are in
	the expansion enclosure.

192