Dell 36XX, 34XX, 38XX Show Physical Disk Channel Statistics, Show Physical Disk Download Progress

Show Physical Disk Channel Statistics

Description

This command shows cumulative physical disk channel data transfer and error information. If the RAID controller module has automatically degraded a channel, this command also shows interval statistics. When using this command, you can display information about one specific physical disk channel, several physical disk channels, or all physical disk channels.

Syntax

show (physicalDiskChannel [(1 2)]

physicalDiskChannels [1 2] allPhysicalDiskChannels) stats

Parameters

Parameter	Description
physicalDiskChannel	Identifier number of the physical disk port for
	which to display information. Valid physical disk
	port values are 1 or 2. You must put brackets ([ ])
	around the physical disk channel values.
physicalDiskChannels	Identifier number of the physical disk ports for
	which to display information. Valid physical disk
	port values are 1 or 2. You must put brackets ([ ])
	around the physical disk channel values.
allPhysicalDiskChannels	The identifier that selects all of the physical disk
	ports.

Show Physical Disk Download Progress

Description

This command returns the status of firmware downloads for the physical disks targeted by the download physicalDisk firmware or download storageArray physicalDiskFirmware commands.

Syntax

show allPhysicalDisks downloadProgress

Parameters

None.

NOTE: When all firmware downloads have successfully completed, this command returns a Successful status. If any firmware downloads fail, this command shows the firmware download status of each targeted physical disk. This command returns the status values shown in the following table.

347