Dell 34XX, 38XX, 32XX, 36XX manual User-Defined Number of Drives

enclosureIDN,drawerIDN,slotIDN) [enclosureLossProtect=(TRUE FALSE)] [dataAssurance=(none enabled)]

User-Defined Disk Group

recreate storageArray replicationRepository repositoryDiskGroup=diskGroupName [freeCapacityArea=freeCapacityIndexNumber]

User-Defined Number of Drives

recreate storageArray replicationRepository repositoryRAIDLevel=(1 5 6) repositoryPhysicalDiskCount=numberOfPhysicalDisks [physicalDiskType=(SAS)] [enclosureLossProtect=(TRUE FALSE)]

[dataAssurance=(none enabled)]

Parameters

Parameter	Description
repositoryRAIDLevel	The RAID level for the replication repository virtual
	disk. Valid values are 1, 5, or 6.
repositoryPhysicalDisks	The physical disks for the replication repository
	virtual disk. Specify the enclosure ID and slot ID for
	each physical disk that you assign to the replication
	repository virtual disk. Enclosure ID values are 0 to
	99. Slot ID values are 1 to 32. Enclose the
	enclosure ID values and the slot ID values in
	parentheses.
repositoryDiskGroup	The name of the disk group where the replication
	repository virtual disk is located.
freeCapacityArea	The index number of the free space in an existing
	disk group that you want to use to re-create the
	replication repository virtual disk. Free capacity is
	defined as the free capacity between existing
	virtual disks in a disk group. For example, a disk
	group might have the following areas: virtual disk 1,
	free capacity, virtual disk 2, free capacity, virtual
	disk 3, free capacity. To use the free capacity
	following virtual disk 2, you would specify:
	freeCapacityArea=2
	Run the show diskGroup command to determine
	if a free capacity area exists.
repositoryPhysicalDiskCount	The number of unassigned physical disks that you
	want to use for the replication repository virtual
	disk.
enclosureLossProtect	The setting to enforce enclosure loss protection
	when you create the replication repository virtual

240