Dell 36XX, 34XX, 38XX, 32XX manual Configure Automatic Support Bundle Collection

NOTE: You can use any combination of alphanumeric characters, hyphens, and underscores for the names. Command names can have a maximum of 30 characters. If you exceed the maximum character limit, replace square brackets ([ ]) with angle brackets (< >) to overcome this limitation.

Configure Automatic Support Bundle Collection

Description

This command enables or disables the automatic collection of support bundles on one or more storage arrays when a critical Major Event Log (MEL) event is detected.

NOTE: This command must be run from the command line. It cannot be run in the MD Storage Manager script editor.

Syntax

supportBundle auto (enabledisable) (all storageArrayName) [data=directorypath]

Parameters

Parameter	Description
enable	Enable automatic collection of support bundles
	when a critical MEL event is detected.
disable	Disable automatic collection of support bundles
	where the feature was previously enabled.
all	Apply the command to all storage arrays detected
	from the host.
storageArrayName	Apply the command to the named storage array.
data	Store the data generated by the command at the
	location specified by the directorypath.

Convert Snapshot (Legacy) Virtual Disk To Snapshot Group

Description

This command migrates a snapshot (legacy) virtual disk to a snapshot group and converts an existing snapshot (legacy) repository virtual disk to a snapshot image repository virtual disk. A maximum of four snapshots (legacy) can be converted to a snapshot group. None of the snapshots (legacy) can be in a disabled state or involved in an in-progress virtual disk copy operation. If the base virtual disk has more than four snapshots (legacy), you must delete the extra snapshots before running this command.

Syntax

convert snapshotVirtualDisk baseVirtualDisk="baseVirtualDiskName"

155