Dell 34XX Show RAID Controller Module, Show allControllers controller 0 1 summary, AllControllers

Status	Definition
Successful	Downloads completed without errors.
Not Attempted	Downloads did not start.
Partial Download	Downloads are in progress.
Failed	Downloads completed with errors.

Show RAID Controller Module

Description

For each RAID controller module in a storage array, this command returns the following information:

•Status (Online, Offline)

•Current firmware and NVSRAM configuration

•Pending firmware and NVSRAM configuration configurations (if any)

•Board ID

•Product ID

•Product revision

•Serial number

•Date of manufacture

•Date and time to which the RAID controller module is set

•Associated virtual disks (including preferred owner)

•Ethernet port

•Physical disk interface

Syntax

show (allControllers controller [(0 1)]) [summary]

Parameters

Parameter	Description
allControllers	Returns information about both RAID controller
	modules in the storage array.
controller	Returns information about a specific RAID
	controller module in the storage array. Valid RAID
	controller module identifier values are 0 and 1. The
	identifier value is 0 for the RAID controller module
	on the top and 1 for the RAID controller module on
	the bottom when viewed from the rear of the
	enclosure. You must put brackets ([ ]) around the
	RAID controller module identifier.
summary	Returns a concise list of information about both
	RAID controller modules in the storage array.

348