Dell 34XX Resume Snapshot Image Rollback, Resume snapImage snapImageName rollback, SnapImage

Resume Snapshot Image Rollback

Description

This command resumes a rollback operation that has entered a paused state. A rollback operation can enter a paused state due to processing errors, which causes a Needs Attention condition for the storage array.

If the rollback operation cannot be resumed, the selected snapshot virtual disk reverts to a paused state, and the Needs Attention condition is displayed.

NOTE: You cannot use this command for snapshot images involved in online virtual disk copy.

Syntax

resume snapImage [snapImageName] rollback

Parameter

Parameter	Description
snapImage	The name of the snapshot image for which you
	want to restart a rollback operation. The name of a
	snapshot image is comprised of two parts:
	• The name of the snapshot group.
	• An identifier for the snapshot image in the
	snapshot group.
	The identifier for the snapshot image can be one of
	these:
	• An integer value that is the sequence number
	of the snapshot in the snapshot group.
	• NEWEST - Use this option when you want to
	show the latest snapshot image created in the
	snapshot group.
	• OLDEST - Use this option when you want to
	show the earliest snapshot image created in the
	snapshot group.
	Enclose the snapshot image name in double
	quotation marks (" ") inside square brackets ([ ]).

Notes

The name of a snapshot image has two parts separated by a colon (:):

•The identifier of the snapshot group

•The identifier of the snapshot image

264