Dell 38XX, 34XX, 32XX, 36XX manual Syntax, RemoteStorageArrayNameWwn

group command to specify the identity of the remote storage array that contains the virtual disks that hold the secondary role in the replicate relationship.

Syntax

create asyncRemoteReplicationGroup userLabel="asyncRemoteReplicationGroupName" (remoteStorageArrayName="storageArrayName" remoteStorageArrayWwn="wwID") interfaceType=(FC iSCSI)

[remotePassword="password"

syncInterval=integer (minutes hours days) warningSyncThreshold=integer (minutes hours days) warningRecoveryThreshold=integer (minutes hours days) warningThresholdPercent=percentValue autoResync=(TRUE FALSE)]

Parameters

Parameter	Description
userLabel	The name of the new remote replication group
	that you want to create. Enclose the new remote
	replication group name in double quotation marks
	(" ").
	The name must be unique on the local and remote
	storage arrays.
remoteStorageArrayName	The name for the remote storage array on which
	you are replicating the remote replication group.
	Enclose the storage array name in double
	quotation marks (" ").
	The remote storage array must have the same
	connection type as the local storage array.
remoteStorageArrayNameWwn	The World Wide Identifier (WWID) of the remote
	storage array on which you are replicating the
	remote replication group. You can use the WWID
	instead of the storage array name to identify the
	storage array. Enclose the WWID in angle brackets
	(< >).
	The remote storage array must have the same
	connection type as the local storage array.
interfaceType	Specify which connection type to use: either Fibre
	Channel fabric or iSCSI interface. (The default is
	Fibre Channel.) The local storage array and the
	remote storage array must be connected through
	a proper Fibre Channel fabric or iSCSI interface.
remotePassword	The password for the remote storage array. Use
	this parameter when the remote storage array is
	password protected. Enclose the password in
	double quotation marks (" ").

185