Dell 36XX, 34XX, 38XX Set Storage Array Icmp Response, Set Storage Array iSNS Server IPv4 Address

NOTE: You must include all of the enclosures in the storage array in the list defined by the enclosurePositions parameter. If the number of enclosures in the list does not match the total number of enclosures in the storage array, an error message is shown.

Set Storage Array ICMP Response

Description

This command returns the default values for negotiable settings for sessions and connections, which represent the starting point for the storage array for negotiations.

Syntax

set storageArray icmpPingResponse=(TRUE FALSE)

Parameter

Parameter	Description
icmpPingResponse	This parameter turns on or turns off Echo Request
	messages. Set the parameter to TRUE to turn on
	Echo Request messages. Set the parameter to
	FALSE to turn off Echo Request messages.

Set Storage Array iSNS Server IPv4 Address

Description

This command sets the configuration method and address for an IPv4 Internet Storage Name Service (iSNS).

Syntax

set storageArray isnsIPv4ConfigurationMethod=(static dhcp) isnsIPv4Address=ipAddress

Parameter

Parameter	Description
isnsIPv4Address	The IP address that you want to use for the iSNS
	server. Use this parameter with the static value for
	IPv4 configurations. If you choose to have a DHCP
	server set the IP address for an IPv4 Internet iSNS
	server, you must set the isnsIPv4Address
	parameter to 0.0.0.0.

323