Start Input Output RAID Controller Module (IOC) Dump

Description

This command produces a dump of the IOC log of data transmissions between a host and a RAID controller module. RAID Controller Modules are identified as "0" or "1". Each RAID controller module can have up to four host channels, each channel is uniquely identified by a number from 1 through 4.

Syntax

start IOCLog [(0,1 0,2 1,1 1,2)] [overwrite=(TRUE FALSE)]

Parameters

Parameter

Description

 

 

RAID controller module-channel identifiers

This parameter specifies the RAID controller

 

module and host channel from which to produce

 

the IOC dump. Valid RAID controller module

 

identifiers are 0 or 1. Enclose the RAID controller

 

module identifier and host channel identifier in

 

square brackets ([ ]).

 

Valid RAID controller module identifier and host

 

channel values are 0,1, 0,2, 1,1, 1,2, .

 

If you do not specify a RAID controller module, the

 

MD storage management software returns a syntax

 

error.

overwrite

This parameter causes the new IOC log dump to

 

overwrite an existing dump. To overwrite the

 

existing dump, set this parameter to TRUE. The

 

default value is FALSE.

NOTE: This command generates a debug log from the IOC of the selected RAID controller module and stores the data in a compressed format in a persistent memory buffer on the RAID controller module. You can retrieve the data from the debug log using the save IOCLog command. The RAID controller module returns an error for these conditions:

The RAID controller module platform and HIC do not support an IOC dump.

The specified RAID controller module has an outstanding IOC dump and the overwrite parameter is false.

The specified controller identifier or channel identifier are out of the valid range

Start iSCSI DHCP Refresh

Syntax

start controller [(0 1)] iscsiHostPort [(1 2 3 4)] dhcpRefresh

383

Page 383
Image 383
Dell 36XX, 34XX, 38XX, 32XX manual Start Input Output RAID Controller Module IOC Dump, Start iSCSI Dhcp Refresh