Dell 38XX, 34XX Update Snmp Trap Destination, Validate Storage Array Security Key, SysLocation

Parameter	Description
sysLocation	The physical location of the system, such as "3rd
	flr". Enclose the SNMP system location in square
	brackets([ ]).

Update SNMP Trap Destination

Description

This command turns on or turns off sending authentication failure messages for an SNMP trap destination. Failure occurs when the SNMP agent received a message from an SNMP manager, but the message contained an invalid community name.

Syntax

set snmpTrapDestination trapReceiverIP=ipAddress communityName="communityName" [sendAuthenticationFailureTraps=(TRUE FALSE)]

Parameters

Parameter	Description
trapReceiverIP	The IP address of the SNMP manager to which you
	want to send trap messages.
communityName	The name of the SNMP community for which you
	want to send trap messages.
sendAuthenticationFailureTraps	This parameter turns on or turns off sending
	authentication failure messages to an SNMP
	manager. To send authentication failure messages,
	set the parameter to TRUE. To prevent sending
	authentication failure messages, set the parameter
	to FALSE. The default is TRUE.

Validate Storage Array Security Key

Description

This command validates the security key for a storage array that has self-encrypting disk physical disks to make sure that the security key is not corrupt.

Syntax

validate storageArray securityKey file="fileName" passPhrase="passPhraseString"

413