Dell 38XX, 34XX, 32XX, 36XX Enable Disk Group Security, File=C\Program Files\CLI\dnld, afrm.dlp

Parameter

Parameter	Description
file	The file path and the file name that contains the
	NVSRAM values. Enclose the NVSRAM file name in
	double quotation marks (" "). For example:
	file="C:\Program Files\CLI\dnld
	\afrm.dlp"
	Valid file names have a .dlp extension.
healthCheckMelOverride	The setting to override the results of the health
	check of the major event log (MEL). MEL validation
	still occurs, it is not bypassed. If the MEL check
	fails, you can bypass the failure by using this
	parameter when running the command.
	Before any download, the RAID controller module
	checks the event log to determine if an event has
	occurred that might prevent the new NVSRAM
	from successfully downloading. If such an event
	has occurred, the RAID controller module normally
	does not download new NVSRAM.
	This parameter forces the RAID controller module
	to download new NVSRAM. The default value is
	FALSE. Set this value to TRUE if you want to force
	the RAID controller module to download new
	NVSRAM.

Enable Disk Group Security

Description

This command converts a non-secure disk group to a secure disk group.

Syntax

enable diskGroup [diskGroupName] security

Parameter

Parameter	Description
diskGroup	The alphanumeric identifier (including - and _) of
	the disk group that you want to place in the
	Security Enabled state. Enclose the disk group
	identifier in square brackets ([ ]).

225