Dell 32XX, 34XX, 38XX, 36XX manual Replace Physical Disk, PhysicalDisk wwID

Parameter	Description
	special characters, you must also put quotation
	marks (" ") around the virtual disk name.
consistencyErrorFile	Name of the file that contains the consistency
	error information you use to repair the errors. You
	must put quotation marks (" ") around the file
	name.
verbose	Captures progress details, such as percent
	complete, and shows the progress detail
	information as virtual disk consistency is being
	repaired. To capture progress details, set this
	parameter to TRUE. To prevent capturing progress
	details, set this parameter to FALSE.

Replace Physical Disk

Description

This command redefines the composition of a disk group by replacing a physical disk that is in the disk group with either:

•An unassigned physical disk

•A fully integrated hot spare physical disk

Syntax

replace physicalDisk ([enclosureID,slotID] <wwID>)replacementphysicalDisk=enclosureID,slotID [copyphysicalDisk]

[failphysicalDisk]

Parameters

Parameter	Description
physicalDisk	Specifies the physical disks to assign to the virtual
	disk that you want to create. Specify the enclosure
	ID and slot ID for each physical disk that you assign
	to the virtual disk. Enclosure ID values are 0 to 99.
	Slot ID values are 0 to 31. You must put brackets
	([ ]) around the enclosure ID value and the slot ID
	value.
physicalDisk <wwID>	The World Wide Identifier (WWID) of the physical
	disk that you want to replace. You can use the
	WWID instead of the virtual disk name to identify
	the virtual disk. Enclose the WWID in angle
	brackets (< >).

254