1

CLI Command Updates

This chapter reflects new and updated commands that are available for use with the Dell PowerVault MD 32XX/34XX/36XX/38XX Series storage arrays.

NOTE: Not all commands are valid with all storage arrays. Some commands are specific to certain platforms.

CAUTION: Script commands are capable of changing the configuration and may cause loss of data if not used correctly. Command operations are performed as soon as you run the commands. Before using the script commands, ensure that you have backed up all data, and have saved the current configuration so that you can reinstall it if the changes do not work.

New Commands

The following commands have been added to this guide to reflect the additional functionality available in the PowerVault MD32XX, MD34XX, MD36XX, and MD38XX.

Recover SAS Port Mis-Wire

Reduce Disk Pool Capacity

Register SNMP Community

Register SNMP Trap Destination

Set Event Alert Filtering

Show Blocked Events

Show SNMP Communities

Show SNMP MIB II System Group Variables

Show Storage Array Power Information

Test SNMP Trap Destination

Unregister SNMP Community

Unregister SNMP Trap Destination

Update SNMP Community

Update SNMP Trap Destination

Update SNMP MIB II System Group Variables

Updated Commands

The syntax of the following commands has been modified, updated, or enhanced since the last release of this document.

16

Page 16
Image 16
Dell 34XX, 38XX, 32XX, 36XX manual New Commands, Updated Commands