Dell 36XX, 34XX, 38XX, 32XX manual Host‑name-or-IP-address is not used

Parameter	Definition
-h	Use with the -aand -xparameters to specify the
	host name that is running the SNMP agent to
	which the storage array is connected.
-I	Use to specify the type of information to be
	included in the e-mail alert notifications. The
	following are valid information arguments:
	• eventOnly— Only event information is
	included in the e-mail.
	• profile— Event and array profile information
	is included in the e-mail.
	• supportBundle— Event and support bundle
	information is included in the e-mail.
	NOTE: You can enter only one information
	argument each time you execute the
	command. If you want all of the information,
	you must run the command three times.
-i	Use with the -dparameter to display the IP address
	of the known storage arrays.
-m	Use to specify the host name or IP address of the
	e-mail server from which to send e-mail alert
	notifications.
-n	Use to specify the name of the storage array on
	which to run the script commands. This name is
	optional when you use host‑name-or-IP-
	address; however, if you are using the in-band
	method for managing the storage array, you must
	use the -nparameter if more than one storage
	array is connected to the host at the specified
	address. The storage array name is required when
	host‑name-or-IP-address is not used;
	however, the name of the storage array configured
	for use in the MD Storage Manager GUI (that is,
	listed in the configuration file) must not be a
	duplicate name of any other configured storage
	array.
-o	Use with the -cor -fparameter to specify a file
	name for all output text that is a result of running
	the script commands.
-p	Use to specify the password for the storage array
	on which to run commands. A password is not
	necessary under the following conditions:
	• A password has not been set on the storage
	array.
	• The password is specified in a script file that is
	running.

23