Dell 34XX, 38XX, 32XX Show Disk Pool, Show Host Ports, CancelImport, Show diskPool diskPoolName

Parameters

Parameter	Description
diskGroup	Number of the disk group for which to display
	information. You must put brackets ([ ]) around the
	disk group number.
cancelImport	The setting to spin the physical disks back down
	after the disk group dependencies have been read.
	To spin down the physical disks, set this parameter
	to TRUE. To let the physical disks stay spinning, set
	this parameter to FALSE.

NOTE: This command returns the dependencies of a specific disk group, which must be in an Exported state or a Forced state. If a decision is made to retain the listed dependencies, then the cancelImport parameter can be enforced to spin the physical disks back down. You must run the show diskGroup importDependencies command before you run the start diskGroup import command.

Show Disk Pool

Description

This command returns information on the used and free capacity and other properties for the disk pool.

Syntax

show diskPool [diskPoolName]

Parameter

Parameter	Description
diskPool	The alphanumberic identifier of the disk pool
	(including – and _) that you want to set to a
	Complete state. Enclose the diskPoolName in
	square brackets ([ ]).

Show Host Ports

Description

For all HBA host ports connected to a storage array, this command returns the following information:

•HBA host port identifier

•HBA host port name

•HBA host type

344