Dell 34XX, 38XX, 32XX, 36XX manual Set iSCSI Initiator, IscsiID

Parameter	Description
	label has special characters, enclose the HBA host
	port label in double quotation marks (" ").
host	The name of the host to which the HBA host port
	is connected. Enclose the host name in double
	quotation marks (" ").
userLabel	The new name that you want to give to the HBA
	host port. Enclose the new name of the HBA host
	port in double quotation marks (" ").

NOTE: When you use this command, you can specify one or more of the optional parameters. You do not, however, need to use all of the parameters.

NOTE: You can use any combination of alphanumeric characters, hyphens, and underscores for the names. Command names can have a maximum of 30 characters. If you exceed the maximum character limit, replace square brackets ([ ]) with angle brackets (< >) to overcome this limitation.

Set iSCSI Initiator

Description

This command sets the attributes for an iSCSI initiator.

Syntax

set iscsiInitiator (["iscsiID"] <"wwID">) (userLabel="newName" host="newHostName" chapSecret="newSecurityKey")

Parameters

Parameter	Description
iscsiID	The name of the iSCSI initiator for which you want to
	set attributes.
userLabel	The new name that you want to use for the iSCSI
	initiator.
host	The name of the new host to which the HBA host
	port is connected. Enclose the host name in double
	quotation marks (" ").
chapSecret	The password that you want to use to authenticate a
	peer connection.

NOTE: Challenge Handshake Authentication Protocol (CHAP) is a protocol that authenticates the peer of a connection. CHAP is based upon the peers sharing a “secret.” A secret is a security key that is similar to a password.

296