Dell 36XX, 34XX, 38XX Show Remote Replication Virtual Disk Candidates, SynchronizationProgress

Parameters

Parameter	Description
asyncRemoteReplicationGroup	The name of the remote replication group for
	which you want to check the synchronization
	progress. Enclose the remote replication group
	name in square brackets ([ ]). If the remote
	replication group name has special characters, you
	also must enclose the remote replication group
	name in double quotation marks (" ") inside square
	brackets. If the remote replication group name
	consists only of numbers, such as "1002," you also
	must enclose the remote replication group name
	in double quotation marks (" ") inside square
	brackets.
synchronizationProgress	Use this optional parameter to display the periodic
	synchronization progress of the remote replication
	group.

Show Remote Replication Virtual Disk Candidates

Description

NOTE: This command valid only with Fibre Channel storage arrays.

This command returns information about the candidate virtual disks on a remote storage array that can be used as secondary virtual disks in a Remote Replication configuration.

Syntax

show remoteReplication candidates primary= ”virtualDiskName” remoteStorageArrayName=storageArrayName

Parameters

Parameter	Description
primary	The name of the local virtual disk that you want for
	the primary virtual disk in the remote-replicated
	pair. Enclose the primary virtual disk name in
	double quotation marks (“ ”).
remoteStorageArrayName	The remote storage array that contains possible
	virtual disks for a secondary virtual disk. If the
	remote storage array name has special characters,
	it must be enclosed in double quotation marks (“ ”).

351