Dell 38XX, 34XX, 32XX Set Disk Pool Complete, AllDiskPools, Set diskPool diskPoolName complete

Parameters

Parameter	Description
diskPools	The list of diskPoolNames identifies multiple
	physical disk pool which have their parameters
	reset by the command.
allDiskPools	This parameter specifies that all physical disk pools
	have their parameters reset by the command.
reservePhysicalDiskCount	This value is specified in terms of the number of
	physical disks to reserve in the disk pool for
	physical disk failures or physical disk removals.
warningThreshold	The percentage of disk pool capacity at which you
	receive a warning alert that the disk pool is nearing
	full capacity. Use integer values. For example, a
	value of 70 means 70 percent. For best operation,
	the value for this parameter must be less than the
	value for the criticalThreshold parameter.
	Setting this parameter to 0 disables warning alerts.
criticalPriority	This parameter governs the priority for critical
	reconstruction activities on the disk pool.
backgroundPriority	This parameter governs the priority for background
	task activities on the disk pool.

Set Disk Pool Complete

Description

This command sets a disk pool that is in an Incomplete state to the Complete state.

Syntax

set diskPool [diskPoolName] complete

Parameter

Parameter	Description
diskPool	The alphanumberic identifier of the disk pool
	(including – and _) that you want to set to a
	Complete state. Enclose the diskPoolName in
	square brackets ([ ]).

289