Dell 34XX, 38XX, 32XX, 36XX manual Show Snmp Communities, LocalVirtualDisk or localVirtualDisks

Show Remote Replication Virtual Disk Synchronization Progress

NOTE: This command valid only with Fibre Channel storage arrays.

Description

This command returns the progress of data synchronization between the primary virtual disk and the secondary virtual disk in a Remote Replication configuration. This command shows the progress as a percentage of data synchronization that has been completed.

Syntax

show remoteReplication (localVirtualDisk [“virtualDiskName”] localVirtualDisks [“virtualDiskName1” ...

“virtualDiskNameN”])

Parameters

Parameter	Description
localVirtualDisk or localVirtualDisks	The name of the primary virtual disk of the remote
	replication pair for which you want to check
	synchronization progress. Enclose the primary
	virtual disk name in double quotation marks (“ ”)
	inside square brackets ([ ]).

Show SNMP Communities

Description

This command returns information about the Simple Network Management Protocol (SNMP) communities defined for the storage array. SNMP communities are collections of devices, such as routers, switches, printers, and storage devices grouped together to manage and monitor the devices. this command displays the following information about the SNMP communities.

•The total number of communities

•The total number of trap destinations

•The names of the SNMP communities

Syntax

show (allSnmpCommunities

snmpCommunity communityName="snmpCommunityName" snmpCommunities ["snmpCommunityName1" ... "snmpCommunityNameN"]) [summary]

352