Dell 32XX, 34XX, 38XX, 36XX manual Delete Virtual Disk On a Disk Pool, RemoveDiskGroup

Parameters

Parameter	Description
allVirtualDisks	Deletes all virtual disks in a storage array.
	NOTE: Using the allVirtualDisks
	parameter deletes virtual disks until all are
	removed or until an error is encountered. If an
	error is encountered, this command does not
	attempt to delete the remaining virtual disks.
virtualDisk or virtualDisks	Name of the virtual disk to delete. You can enter
	more than one virtual disk name. You must put
	brackets ([ ]) around the virtual disk name. If the
	virtual disk name has special characters, you must
	also put quotation marks (" ") around the virtual
	disk name.
removeDiskGroup	Deleting the last virtual disk in a disk group does
	not delete the disk group. You can have a
	standalone disk group (minus any virtual disks). To
	remove the standalone disk group, set this
	parameter to TRUE. To keep standalone disk
	groups intact, set this parameter to FALSE.
schedule	Deletes only the schedule.

Delete Virtual Disk On A Disk Pool

Description

This command deletes either normal or thin virtual disks on a disk pool.

CAUTION: All of the data in the virtual disk is lost as soon as you run this command.

Syntax

delete (allVirtualDisks virtualDisk [virtualDiskName]

virtualDisks [virtualDiskName1 ... virtualDiskNameN] allVirtual disks) [removeDiskGroup=(TRUE FALSE)

retainRepositoryMembers=(TRUE FALSE)] force=(TRUE FALSE)

schedule

retainRepositoryMembers=(TRUE FALSE)]

214