Dell 34XX, 38XX, 32XX, 36XX manual Password=password command

Parameter	Definition
	• The storage array password is specified by
		using the -cparameter and the set session
		password=password command.
-q	Use to specify how frequently to include additional
	profile or support bundle information in the e-mail
	alert notifications. An e-mail alert notification that
	contains at least the basic event information is
	always generated for every critical event. If you set
	the-Iparameter to eventOnly, the only valid
	argument for -qis everyEvent. If you set the-I
	parameter to either profile or supportBundle,
	this information is included with the e-mails with
	the frequency specified by the-qparameter.
	Valid frequency arguments are:
	• everyEvent— Information is returned with
		every e-mail alert notification.
	• 2— Information is returned no more than once
		every two hours.
	• 4— Information is returned no more than once
		every four hours.
	• 8— Information is returned no more than once
		every eight hours.
	• 12— Information is returned no more than
		once every 12 hours.
	• 24— Information is returned no more than
		once every 24 hours.
-r	Use with the -aor -xparameter to specify the
	name of a management station. The name of a
	management station can be either direct_sa (out-
	of-band storage array) or host_sa (in-band storage
	arrays [host-agent]). The -rparameter enables you
	to set or change the alert notifications for all
	storage arrays under each management station.
-S (uppercase)	Use to suppress the informational messages
	describing command progress that appear when
	running script commands. (Suppressing
	informational messages is also called silent mode.)
	This parameter suppresses the following messages:
	•	Performance syntax check
	•	Syntax check complete
	•	Executing script
	•	Script execution complete
	•	SMcli completed successfully
-s (lowercase)	Use with the -dparameter to display the alert
	settings in the configuration file.

24