Dell 36XX, 34XX, 38XX, 32XX manual Clear Storage Array Configuration, VirtualDisks

Parameter	Description
virtualDisk	The name of the specific member virtual disk (in a
	remote replication group) from which you want to
	clear the remote replication fault. Enclose the
	member virtual disk name in square brackets ([ ]). If
	the virtual disk name has special characters, you
	also must enclose the virtual disk name in double
	quotation marks (" ") inside square brackets. If the
	virtual disk name consists only of numbers, such as
	"1002," you also must enclose the virtual disk name
	in double quotation marks (" ") inside square
	brackets.
virtualDisks	The names of several member virtual disks (in a
	remote replication group) from which you want to
	clear the remote replication fault. Enter the names
	of the member virtual disks using these rules:
	• Enclose all of the names in square brackets ([ ]).
	• Enclose each of the names in double quotation
	marks (" ").
	• Separate each of the names with a space.

Clear Storage Array Configuration

Description

Use this command to:

•Clear the entire storage array configuration, and return it back to the initial installation state.

•Clear the configuration except for security information and identification information.

•Clear disk group configuration information and virtual disk configuration information only.

CAUTION: As soon as you run this command, the existing storage array is deleted.

Syntax

clear storageArray configuration (all diskGroups)

Parameters

If you do not enter a parameter, this command removes all configuration information for the storage array, except for the information related to security and identification.

Parameter	Description
all	The setting to remove the entire configuration of
	the storage array, including security and identity
	information. Removing all configuration

151