Dell 38XX, 34XX, 32XX, 36XX manual Show Storage Array Auto Configure, PhysicalDiskType

Parameter	Description
	• Time remaining

NOTE: When you save the information to a file, you can use the information as a record of your configuration and as an aid during recovery.

Show Storage Array Auto Configure

Description

This command shows the default autoconfiguration that the storage array creates if you issue the autoConfigure storageArray command. To determine whether the storage array can support specific properties, enter the parameter for the properties when you issue this command. You do not, however, need to enter any parameters for this command to return configuration information. If you do not specify any properties, this command returns the RAID 5 candidates for each physical disk type. If RAID 5 candidates are not available, this command returns candidates for RAID 1 or RAID 0. In order to view the RAID 6 autoConfiguration options, you must specify the raidLevel option. When you specify auto-configuration properties, the RAID controller modules validate that the firmware can support the properties.

Syntax

show storageArray autoConfiguration [physicalDiskType=(SAS) raidLevel=(0 1 5 6)

diskGroupWidth=numberOfPhysicalDisks diskGroupCount=numberOfDiskGroups virtualDisksPerGroupCount=

numberOfVirtualDisksPerGroup hotSpareCount=numberOfHotspares segmentSize=segmentSizeValue cacheReadPrefetch=(TRUE FALSE) securityType=(none capable enabled)]

Parameters

Parameter	Description
physicalDiskType	Type of physical disk to use for the storage array.
	Valid physical disk type is SAS. This parameter is
	not required if only one type of physical disk is in
	the storage array.
raidLevel	RAID level of the disk group that contains the
	physical disks in the storage array. Valid RAID levels
	are 0, 1, 5 or 6.
diskGroupWidth	Number of physical disks in a disk group in the
	storage array. This number depends on the
	capacity of the physical disks. Integer values are
	required. For information about the number of
	physical disks that you can use in a disk group, see
	Enclosure Loss Protection.

365