Dell 36XX, 34XX, 38XX, 32XX manual Set Event Alert Filtering, Set blockEventAlert eventType

Parameters

Parameter	Description
enclosure	Service tag of the RAID enclosure or the expansion
	enclosure for which you are setting the enclosure
	ID. You must put quotation marks (" ") around the
	Service Tag.
id	Specifies the value for the RAID enclosure or
	expansion enclosure ID. Valid values are 0 through
	99. You do not need to put parentheses around
	the enclosure ID value.

Set Event Alert Filtering

Description

The set event alert commands manage alert event notification by either disabling a specific critical event alert from being sent, or by enabling notification about a specific critical event alert to be sent. To prevent notification about a specific critical event alert from being sent, you block it. To enable notification about a specific critical event alert to be sent, you unblock it.

The storage management software supports different priorities of events (such as Informational, Warning, Critical). When you define your storage array, you can configure alerts and define how the event alerts are managed. If you have configured the storage array to send alerts, then a notification is sent to a designated recipient when a Critical event occurs. That notification can be one or all of the following types:

•email

•syslog

•trap notifications

The set event alert CLI commands work on a single storage array. When you run the commands on a storage array, only that storage array is affected by the commands. Other storage arrays that have not had the CLI command run against them have the default behavior.

Blocking an event alert does not prevent the event from being posted to the system event log. All events will continue to be posted to the event log.

Syntax

Syntax to Block an Event Alert

set blockEventAlert eventType

Syntax to Unblock an Event Alert

set unBlockEventAlert eventType

291