Dell 36XX, 34XX Set Storage Array Unnamed Discovery Session, Set Thin Virtual Disk Attributes

Syntax

set storageArray time

Parameters

None.

Set Storage Array Unnamed Discovery Session

Description

This command enables the storage array to participate in unnamed discovery sessions.

Syntax

set storageArray unnamedDiscoverySession=(TRUE FALSE)

Parameter

Parameter	Description
unnamedDiscoverySession	This parameter turns on or turns off unnamed
	discovery sessions. Set the parameter to TRUE to
	turn on unnamed discovery sessions. Set the
	parameter to FALSE to turn off unnamed discovery
	sessions.

NOTE: Discovery is the process where initiators determine the targets that are available. Discovery occurs at power-on/initialization and also if the bus topology changes, for example, if an extra device is added.

NOTE: An unnamed discovery session is a discovery session that is established without specifying a target ID in the login request. For unnamed discovery sessions, neither the target ID nor the target portal group ID are available to the targets.

Set Thin Virtual Disk Attributes

Description

This command defines the properties for a thin virtual disk. You can use the parameters to define properties for one or more thin virtual disks.

Syntax

set (virtualDisk [virtualDiskName] virtualDisks [virtualDiskName1 ...

virtualDiskNameN] virtualDisk <"wwID">) [newCapacity=capacityValue] [repositoryMaxCapacity=capacityValue] [repositoryExpansionPolicy=(automatic manual)] [warningThresholdPercent=warningThresholdPercentValue] [addRepositoryCapacity=capacity-spec]

327