Dell 36XX, 34XX, 38XX, 32XX manual Set Physical Disk State, Set RAID Controller Module

Set Physical Disk State

Description

This command sets a physical disk to the Failed state. To return a physical disk to the Optimal state, use the revive physicalDisk command. Optionally, you can copy the data from the physical disk before you fail it.

Syntax

set physicalDisk [enclosureID,drawerID,slotID] operationalState=failed [copyPhysicalDisk]

Parameters

Parameter	Description
physicalDisk or physicalDisks	The enclosure and the slot where the physical disk
	resides. Enclosure ID values are 0 to 99. Slot ID
	values are 0 to 31. Enclose the enclosure ID values
	and the slot ID values in square brackets ([ ]).
copyPhysicalDisk	This parameter copies the data from the physical
	disk that you are replacing to the replacement
	physical disk.

Set RAID Controller Module

Description

This command defines the attributes for the RAID controller modules.

Syntax

set controller [(0 1)]

[availability=(online offline serviceMode)] [ethernetPort [(0 1)] ethernetPortOptions]

[globalNVSRAMByte [nvsramOffset]=(nvsramByteSetting nvsramBitSetting)] [hostNVSRAMByte [hostType, nvsramOffset]=(nvsramByteSetting nvsramBitSetting)]

[IPv4GatewayIP=ipAddress] [IPv6RouterAddress=ipv6Address]

[iscsiHostPort [(0 1 2 3)] iscsiHostPortOptions] [rloginEnabled=(TRUE FALSE)] [serviceAllowedIndicator=(on off)]

299