Dell 36XX, 34XX, 38XX, 32XX manual Save Storage Array iSCSI Statistics

Parameter	Description
warningEvents	Saves only warning events to a file.
infoEvents	Saves only informational events to a file.
debugEvents	Saves only debug events to a file.
file	Specifies name of the file to which to save the
	events. You must put quotation marks (" ") around
	the file name.
count	Specifies the number of events or critical events to
	save to a file. If you do not enter a value for the
	count, all events or critical events are saved to the
	file. If you enter a value for the count, only that
	number of events or critical events (starting with
	the last event entered) are saved to the file. Use
	integer values.
forceSave	When set to TRUE, force saves all critical events to
	a file. Default value is FALSE.

Save Storage Array iSCSI Statistics

Description

This command saves the iSCSI performance of the storage array to a file. The following statistics are saved to the file:

•Statistics related to the physical Ethernet port

•Statistics related to the TCP protocol

•Statistics related to the IP protocol

Syntax

save storageArray iscsiStatistics [(raw baseline)] file="filename"

Parameters

Parameter	Description
raw	This parameter defines that the statistics collected
	are all statistics from the RAID controller module
	start‑of‑day. Enclose the parameter in square
	brackets ([ ]).
baseline	This parameter defines that the statistics collected
	are all statistics from the time the RAID controller
	modules were reset to zero using the reset
	storageArray iscsiStatsBaseline
	command. Enclose the parameter in square
	brackets ([ ]).

279