Dell 32XX, 34XX, 38XX, 36XX manual Save Storage Array Configuration, AllConfig, GlobalSettings

Notes

Statistics are captured for replicated virtual disks in the Primary role. The statistics collected include the following data:

•Synchronization start time

•Synchronization type (manual or periodic)

•Synchronization duration

•Number of bytes sent

•Maximum write time (for a single write)

•Minimum write time (for a single write)

•Minimum synchronization data rate

•Maximum synchronization data rate

•Total write time

•Repository utilization (%)

•Recovery point age

During initial synchronization, statistics samples are captured approximately every 15 minutes.

The synchronization statistics are included in the support bundle.

Save Storage Array Configuration

Description

This command creates a script file that you can use to create the current storage array virtual disk configuration.

Syntax

save storageArray configuration file="filename"

[(allConfig globalSettings=(TRUE FALSE) virtualDiskConfigAndSettings=(TRUE FALSE)

hostTopology=(TRUE FALSE) lunMappings=(TRUE FALSE))]

Parameters

Parameter	Description
file	Name of the file that contains the configuration
	values. You must put quotation marks (" ") around
	the file name.
allConfig	Saves all of the configuration values to the file. (If
	you choose this parameter, all of the configuration
	parameters are set to TRUE.)
globalSettings	Saves the global settings to the file. To save the
	global settings, set this parameter to TRUE. To

274