Dell 38XX Remove Remote Replication, RemovePhysicalDisks, LocalVirtualDisk or localVirtualDisks

Parameters

Parameter	Description
ssdCache	The alphanumeric identifier (including - and _) of
	the SSD cache from which you want to remove
	SSDs. Enclose the identifier in square brackets ([ ]).
	If the SSD cache name contains special characters
	or consists only of numbers, you also must enclose
	the identifier in double quotation marks (" ") inside
	square brackets.
removePhysicalDisks	The physical disks that you want to remove from
	the SSD cache. For high-capacity expansion
	enclosures, specify the enclosure ID value, the
	drawer ID value, and the slot ID value for each SSD
	that you want to remove. For low-capacity
	expansion enclosures, specify the enclosure ID
	value and the slot ID value for each SSD that you
	want to remove. Enclosure ID values are 0 to 99.
	Drawer ID values are 0 to 4. Slot ID values are 0 to
	31. Enclose the enclosure ID values, the drawer ID
	values, and the slot ID values in parentheses.

Notes

You cannot remove all of the SSDs from the SSD cache using this command; at least one SSD must remain in the SSD cache. If you want to completely remove the SSD cache, use the delete ssdCache command instead.

Remove Remote Replication

Description

NOTE: This command valid only with Fibre Channel storage arrays.

This command removes the replication relationship between the primary virtual disk and the secondary virtual disk in a remote replication pair.

Syntax

remove remoteReplication (localVirtualDisk [virtualDiskName] localVirtualDisks [virtualDiskName1... virtualDiskNameN])

Parameter

Parameter	Description
localVirtualDisk or localVirtualDisks	The name of the primary virtual disk (the virtual
	disk on the local storage array) that you want to
	remove. You can enter more than one virtual disk

249