Dell 36XX, 34XX Primary, Secondary, RemoteStorageArrayWwn, SyncPriority, Medium, low, or lowest

Parameters

Parameter	Description
primary	The name of an existing virtual disk on the local
	storage array that you want to use for the primary
	virtual disk. Enclose the primary virtual disk name in
	double quotation marks (“ ”).
secondary	The name of an existing virtual disk on the remote
	storage array that you want to use for the
	secondary virtual disk. Enclose the secondary
	virtual disk name in double quotation marks (“ ”).
remoteStorageArrayName	The name of the remote storage array. Enclose the
	remote storage array name in double quotation
	marks (“ ”).
remoteStorageArrayWwn	The World Wide Identifier (WWID) of the remote
	storage array. Enclose the WWID in double
	quotation marks (“ ”).
remotePassword	The password for the remote storage array. Use
	this parameter when the remote storage array is
	password protected. Enclose the password in
	double quotation marks (“ ”).
syncPriority	The priority that full synchronization has relative to
	host I/O activity. Valid values are highest, high,
	medium, low, or lowest.
autoResync	The settings for automatic resynchronization
	between the primary virtual disks and the
	secondary virtual disks of a remote replication pair.
	This parameter has these values:
	• enabled—Automatic resynchronization is
	turned on. You do not need to do anything
	further to resynchronize the primary virtual disk
	and the secondary virtual disk.
	• disabled—Automatic resynchronization is
	turned off. To resynchronize the primary virtual
	disk and the secondary virtual disk, you must
	run the start asyncReplicationGroup
	command.
writeOrder	The write order for data transmission between the
	primary virtual disk and the secondary virtual disk.
	Valid values are preserved or notPreserved.
writeMode	How the primary virtual disk writes to the
	secondary virtual disk. Valid values are
	synchronous or asynchronous.

183