JBL TLX CENTER2, TLX CENTER1 setup guide TLX Center1, TLX Center2, Troubleshooting, Specifications

Troubleshooting

If there is no sound from the center speaker, check the following:

•Make sure that your receiver’s Center Channel Mode is in the “normal” or “wide” position. If it is in the “phantom” position, the center speaker will not play.

•Check all connections between processor/ amplifier and the center speaker.

If the system plays at low volumes but shuts off as volume is increased, check the following:

•Check all wires and connections between receiver/amplifier and speakers. Make sure all wires are connected. Make sure none of the speaker wires are frayed, cut, or punctured.

•If more than one pair of main speakers is being used, check the minimum impedance requirements of your receiver/amplifier.

Specifications

TLX Center1	Center
High-Frequency Transducer	2-1/2" fiber cone
Low Frequency	4-1/2" (2)
Crossover Frequency	7.5kHz
Frequency Response (–6dB)	90Hz – 20kHz
Sensitivity (1 watt/1 meter)	90dB
Impedance	8 ohms (nominal)
Recommended
Amplifier Power*	10 – 100 watts
Dimensions (HxWxD)	6-1/2 x 18-1/2 x 6-1/8"
	165 x 470 x 156mm
Weight	10 lbs/4.5 kg

TLX Center2	Center
High-Frequency Transducer	14mm titanium
Low Frequency	5-1/4" (2)
Crossover Frequency	2.7kHz
Frequency Response (–6dB)	80Hz – 20kHz
Sensitivity (1 watt/1 meter)	87dB
Impedance	8 ohms (nominal)
Recommended
Amplifier Power*	10 – 100 watts
Dimensions (HxWxD)	7 x 20 x 6-1/2"
	178 x 508 x 165mm
Weight	15 lbs/6.8 kg

* Undistorted continuous power per channel.

JBL continually strives to improve its products. New materials, production methods and design refinements are introduced into existing models without notice as a routine expression of our design philosophy. For this reason, JBL loudspeakers may differ in some respect from their published specifications and descriptions, but will always equal or exceed the original specifications unless otherwise stated.