Specifications

English

AMPLIFIER

 

Output power

2 x 5 W RMS

.............................................................

10 W + 10W MPO

Signal-to-noise ratio

65 dBA (IEC)

Frequency response

63 – 16000 Hz

Impedance loudspeakers

4

CD PLAYER

 

Frequency range

63 – 16000 Hz

Signal-to-noise ratio

65 dBA

TUNER

 

FM wave range

87.5 – 108 MHz

MW wave range

531 – 1602 kHz

Sensitivity at 75

 

– FM 26 dB sensitivity

20 µV

– MW 26 dB sensitivity

5 mV/m

Total harmonic distortion

5%

TAPE DECK

Frequency response

Normal tape (type I) ... 120 – 10000

Hz (8 dB)

Signal-to-noise ratio

 

 

Normal tape (type I)

48 dBA

Wow and flutter

0.4% DIN

SPEAKERS

Bass reflex system

Dimensions (w x h x d) . 142 x 235 x 212 (mm)

GENERAL INFORMATION

AC Power

220 – 230 V / 50 Hz

Dimensions (w x h x d) ...

148 x 235 x 258(mm)

Weight (with/without speakers)

...............................................................

approx. 5.9 / 2.7 kg

Power consumption

 

Active

10 W

Standby

< 3 W

Specifications and external appearance are subject to change without notice.

Troubleshooting

WARNING

Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electric shock.

If a fault occurs, first check the points listed below before taking the system for repair. If you are unable to remedy a problem by following these hints, consult your dealer or Philips for help.

Problem

NO DISC” is displayed.

Solution

Insert a disc.

Check if the disc is inserted upside down.

Wait until the moisture condensation at the lens has cleared.

Replace or clean the disc, see “Maintenance”.

Use a finalized CD-RW or a correct MP3-CD format disc.

18

Page 18
Image 18
Philips MCM190 user manual Specifications, Troubleshooting, No Disc is displayed