Radio reception is poor.
Recording or playback cannot be made.
The tape deck door cannot open.
The system does not react when buttons are pressed.
Sound cannot be heard or is of poor quality.
The left and right sound outputs are reversed.
The remote control does not function properly.
The time is not working.
The Clock/Timer setting is erased.
✔If the signal is too weak, adjust the antenna or connect an external antenna for better reception.
✔Increase the distance between the Mini HiFi System and your TV or VCR.
✔Clean deck parts, see “Maintenance”.
✔Use only NORMAL (IEC I) tape.
✔Apply a piece of adhesive tape over the missing tab space.
✔Remove and reconnect the AC power plug and switch on the system again.
✔Remove and reconnect the AC power plug and switch on the system again.
✔Adjust the volume.
✔Disconnect the headphones.
✔Check that the speakers are connec ted correctly.
✔Check if the stripped speaker wire is clamped.
✔Make sure the
✔Check the speaker connections and location.
✔Select the source (CD or TUNER, for example) before pressing the function button (É,í,ë).
✔Reduce the distance between the remote control and the system.
✔Insert the batteries with their polarities (+/– signs) aligned as indicated.
✔Replace the batteries.
✔Point the remote control directly towards the IR sensor.
✔Set the clock correctly.
✔Press and hold TIMER to switch on the timer.
✔If recording or tape dubbing is in progress, stop recording.
✔Power has been interrupted or the power cord has been disconnected. Reset the clock/timer.
English
19