CD/MP3 Operation
English |
● |
DISPLAY/BAND |
1 |
IMPORTANT: |
➜The current track number and elapsed playing time of the track are displayed during disc playback.
To select a different track
Press TUNING 4 ¢ (on the remote
control 4 ¢) once or repeatedly until the desired track number appears in the display.
To find a passage within a track
Press and hold down on TUNING 4 ¢ (on the remote control 4 ¢).
➜The disc is played at high speed and low volume.
The lens of the CD player should never be touched.
X
Loading a disc
This CD player plays Audio Discs including CD- Recordables,
●
1Select CD source.
2Press OPEN•CLOSE3 on the top of the system to open
the CD compartment.
➜ OPEN is displayed when you open the CD compartment.
3Insert a disc with the printed side facing up and press down on OPEN•CLOSE3 to close the CD door.
➜ READ is displayed as the CD player scans the contents of a disc, and then the total number of tracks and playing time (or the total number of albums and tracks for MP3 disc) are shown.
Basic playback controls
To play a disc
●Press PLAY/PAUSE 2; (on the remote control 2;) to start playback.
2When you recognise the passage you want, release TUNING 4 ¢ (on the remote control 4 ¢).
➜ Normal playback continues.
To interrupt playback
●Press PLAY/PAUSE 2; (on the remote control 2;) during playback.
➜The display freezes and the elapsed playing time flashes when playback is interrupted.
➜To resume, press 2; again.
To stop playback
●Press 9.
Notes: CD play will also stop when;
–the CD door is opened.
–the disc has reached the end.
–you select another source:TAPE or TUNER.
–you select standby.
–you press the tape deck PLAY 2 key.
Playing an MP3 disc
1Load an MP3 disc.
➜The disc reading time may exceed 10 seconds due to the large number of songs compiled into one disc.
➜"XXX YY" is displayed. XXX is the current track number and YY is the current album number.
2 Press 4 3 to select a desired album.
12
