Troubleshooting
General
Radio
CD Player
Tape Player
| Symptom | Remedy | |
| The power does not come on. | • Connect the AC power cord securely. | |
|
| • Make sure the batteries are inserted correctly. | |
|
| • Replace all the batteries with new ones if they | |
|
| are weak. | |
|
|
|
|
| There is no audio. | • Make sure the FUNCTION selector is set to the | |
|
| function you want to operate. | |
|
| • Adjust the volume. | |
|
| • Unplug the headphones when listening through | |
|
| speakers. | |
| The audio is weak or has poor | • Replace all the batteries with new ones if they | |
| quality. | are weak. | |
|
| • Move the player away from the TV. | |
|
|
|
|
| The picture of your TV becomes | • If you are listening to an FM program near the | |
| unstable. | TV with an indoor antenna, move the player | |
|
| away from the TV. | |
| The CD does not play/“no disc” | • Make sure that the CD compartment is closed. | |
| lights in the display even when a | • Place the CD with the label surface up. | |
| CD is in place. | • Clean the CD. | |
|
| • Take out the CD and leave the CD compartment | |
|
| open for about an hour to dry moisture | |
|
| condensation. | |
|
| • Make sure the FUNCTION selector is set to CD. | |
|
|
|
|
| The sound drops out. | • Reduce the volume. | |
|
| • Clean the CD, or replace it if the CD is badly | |
|
| damaged | |
|
| • Place the player in a location free from | |
|
| vibration. | |
| The tape does not move when you | • Close the cassette compartment securely. | |
| press an operation button. |
|
|
|
|
| |
| The REC r button does not | • Make sure the safety tab on the cassette is in | |
| function/The tape does not play. | place. | |
|
| • Make sure the FUNCTION selector is set to CD, | |
|
| AM or FM. | |
The tape does not erase completely. • Clean the erasing heads (see page 22.)
•Replace all the batteries with new ones if they are weak.
20
Additional Information
