Specifications
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC DISTORTION
With
Other Specifications
CD player section
System
Compact disc digital audio system Laser diode properties
Material: GaAlAs
Wave length: 780 nm
Emission duration: Continuous
Laser output: Less than 44.6 µW
(This output is the value measured at a distance of about 200 mm from the objective lens surface on the optical
Spindle speed
200 r/min (rpm) to 500 r/min (rpm) (CLV) Number of channels
2 Frequency response
20 - 20,000 Hz
Below measurable limit
Radio section
Frequency range
FM: 87.6 - 108 MHz
AM: 530 - 1,605 kHz (Australian model) 530 - 1,710 kHz (Other models)
Aerials
FM: Telescopic aerial
AM:
Cassette-corder section
Recording system
Approx. 120 s (sec.) with Sony cassette
TYPE I (normal): 70 - 10,000 Hz
General
Speaker
Full range: 10 cm dia., 2.8ohms, cone type (2) Outputs
Headphones jack (stereo minijack)
For 16 - 68 ohms impedance headphones Power output (excluding US model)
2.5W + 2.5 W (at 2.8 ohms, 10 % harmonic distortion)
Power requirements
For CD radio
230 V AC, 50 Hz (Australian model)
120 V AC, 60 Hz (Other models)
9 V DC, 6 size D (R20) batteries
For remote controller
Power consumption AC 20 W
Battery life
For CD radio
FM recording
Sony R20P: approx. 13.5 h
Sony alkaline LR20: approx. 20 h
Tape playback
Sony R20P: approx. 7.5 h
Sony alkaline LR20: approx. 15 h
CD playback
Sony R20P: approx. 2.5 h
Sony alkaline LR20: approx. 7 h
Dimensions
Approx. 425× 160× 246 mm (w/h/d)
(16 3⁄4 × 6 3⁄8 × 9 3⁄4 inches) (incl. projecting parts) Mass
Approx. 4.0 kg (8 lb. 13 oz) (incl. batteries) Supplied accessory
AC power cord (1)
Remote controller (1)
Design and specifications are subject to change without notice.
Optional accessories
Sony MDR headphone series
Additional Information
23