Dell 36XX, 34XX Resume Remote Replication Group, WriteConsistency, DeleteRecoveryPointIfNecessary

Parameter	Description
	characters, the primary virtual disk name must also
	be enclosed in double quotation marks (“ ”).
writeConsistency	The setting to identify the virtual disks in this
	command that are in a write-consistency group or
	are separate. For the virtual disks to be in the same
	write-consistency group, set this parameter to
	TRUE. For the virtual disks to be separate, set this
	parameter to FALSE.

NOTE: If you set the writeConsistency parameter to TRUE, the virtual disks must be in a write- consistency group (or groups). This command resumes all write-consistency groups that contain the virtual disks. For example, if virtual disks A, B, and C are in a write-consistency group and they have remote counterparts A’, B’, and C’, the resume remoteReplication virtual disk [“A”] writeConsistency=TRUE command resumes A-A’, B-B’, and C-C’.

Resume Remote Replication Group

Description

This command resumes data transfer between all replicated pairs in a remote replication group. Data written to the primary virtual disks while the remote replication group was suspended is written to the secondary virtual disks immediately. Periodic synchronization resumes if an automatic synchronization interval has been set.

Syntax

resume asyncRemoteReplicationGroup ["asyncRemoteReplicationGroupName"] [deleteRecoveryPointIfNecessary]

Parameter

Parameter	Description
asyncRemoteReplicationGroup	The name of the remote replication group for
	which you want to start synchronization. Enclose
	the remote replication group name in double
	quotation marks (" ") inside square brackets ([ ]").
deleteRecoveryPointIfNecessary	The parameter to delete the recovery point if the
	recoverable synchronization data has exceeded
	time threshold for recovery. Recovery point age is
	measured from the time the data was frozen on
	the primary storage array.

263