Dell 38XX, 34XX, 32XX Test Remote Replication Group Connectivity, Suspend ssdCache ssdCacheName

Syntax

suspend ssdCache [ssdCacheName]

Parameter

Parameter	Description
ssdCache	The alphanumeric identifier (including - and _) of
	the SSD cache that you want to suspend. Enclose
	the identifier in square brackets ([ ]). If the SSD
	cache name contains special characters or consists
	only of numbers, you also must enclose the
	identifier in double quotation marks (" ") inside
	square brackets.

Notes

To restart caching, use the resume ssdCache command.

Test Remote Replication Group Connectivity

Description

This command tests possible communication problems between the local storage array and the remote the storage array associated with a remote replication group.

Syntax

diagnose asyncRemoteReplicationGroup ["asyncRemoteReplicationGroupName"] testID=(all connectivity latency bandwidth portConnections)

Parameters

Parameter	Description
asyncRemoteReplicationGroup	The name of an existing remote replication group
	that you want to test. Enclose the remote
	replication group name in square brackets ([ ]). If
	the remote replication group name has special
	characters, you also must enclose the remote
	replication group name in double quotation marks
	(" ").
testID	The identifier for the diagnostic test you want to
	run. The identifier and corresponding tests are as
	follows:
	• All—Performs all the tests associated with this
	command.
	• Connectivity—Verifies that the two RAID
	controller modules have a communication

409